A fixed installation, wall or panel mounted clamp-on ultrasonic flowmeter. Its intuitive configuration program, running on a laptop PC (Windows) makes it incredibly easy to install, commission and use. It incorporates heat quantity measurement functionality. It can accept up to 4 optional plug-in IO modules.
Sonic Driver MODBUS WALL-UFM datasheet 010724
Features
- Intuitive installation using configuration program running on a PC.
- Full set of measured values and instrument and measurement diagnostics available over Modbus RTU RS485.
- Signal oscilloscope for sensor positioning and diagnostics.
- Internal database of pipe and fluid materials.
- Fluid database of sound speed, density and viscosity compensated for fluid temperature (if temperature is known from optional PT100 input).
- Heat quantity measurement (if inlet and outlet temperatures are known from optional PT100 inputs).
- Heat measurement is made using calculations as specified in EN1434-1, section 8 and its Appendix A.
Performance
- Flow velocity range 0.01 to 25 m/s.
- Resolution 0.25 mm/s.
- Repeatability 0.15 % of measured value.
- Accuracy +/- 0.5 to +/- 3.0 % of measured value for velocity greater than 0.2 m/s, depending on application.
- Turn down ratio 1/100.
- Measurement rate 1 Hz as standard.
- Gas/solids < 10 % of volume.
- Measurement: Flow velocity (m/s), Volumetric flow (l/min), Mass Flow (kg/min), Energy flow (KJ/s).