Fixed Installation Flowmeters

Views: 362

Fixed Installation Flowmeters, the Fixed UFM and Fixed MODBUS WALL-UFM.

FIXED UFM

A fixed installation, wall mounted clamp-on ultrasonic flowmeter. Its intuitive menu driven user interface and the layout of its display and keypad makes it incredibly easy to use. It incorporates heat quantity measurement functionality. It can accept up to 6 optional plug-in IO modules.

Sonic Driver FIXED-UFM datasheet 010724

Sonic Driver FIXED-UFM Installation Manual 010724

Sonic Driver FIXED-UFM Operating Instructions 010724

Specification

  • Pipe outer diameters from 10 to 6500 mm.
  • 3 competitively priced ranges to suite common application areas;
    • Small 10 to 115 mm, domestic.
    • Medium 115 to 225 mm, commercial.
    • Large 225 to 6500 mm, process industries.
  • Control unit operational temperature from -10 to +65 degC.
  • Available in both 85 to 264 Vac and 12 to 24 Vdc PSU configurations at 10 W.
  • Standard 16MB internal data-logger.
  • Standard RS232 and USB serial communications.
  • Up to 6 optional plug in IO modules including:
    • Active/Passive current Output 0/4 to 20 mA.
    • Active/Passive current Input 0/4 to 20 mA.
    • Open Collector pulse.
    • Opto Relay pulse.
    • Relay (NO and NC) output.
    • PT100 input (4 wire).
    • Modbus RTU.

Features

  • Intuitive installation using menu driven user interface.
  • Full set of instrument and measurement diagnostics.
  • Signal oscilloscope for sensor positioning and diagnostics.
  • Internal database of pipe, fluid and lining materials.
  • Fluid database of sound speed, density, viscosity and SHC compensated for fluid temperature (if temperature is known from optional PT100 or 0/4 to 20 mA temperature transmitter input).
  • Heat quantity measurement (if inlet and outlet temperatures are known from optional PT100 inputs, 0/4 to 20 mA temperature transmitters or direct user entry).
  • Heat calculations made using either the SHC method, calculations as specified in EN1434-1 section 8 and its Appendix A or Russian standard to GSSSD.
  • All measured values can be totaled.
  • Connection to PC using both serial RS232 and built in USB.
  • Serial communications can be used for device remote programming, control and datalogger.

Performance

  • Flow velocity range 0.01 to 25 m/s.
  • Resolution 0.25 mm/s.
  • Repeatability 0.15 % of measured value.
  • Accuracy +/- 0.5 to +/- 3.0 % of measured value  for velocity greater than 0.2 m/s, depending on application.
  • Turn down ratio 1/100.
  • Measurement rate 1 Hz as standard.
  • Gas/solids < 10 % of volume.
  • Measurement: Flow velocity, Volumetric flow, Mass Flow, Energy flow.

Ultrasonic Fixed Meter UFM-300

The UFM-300 is a fixed installation; guide-rail, pipe, wall, or panel mountable Clamp-on ultrasonic flowmeter, which can be installed and commissioned using a Smart phone App (Android only) or a laptop computer running a configuration program (Windows).

Sonic Driver UFM-300 Datasheet 010724

Once commissioned the UFM-300 can continue to be operated locally as above or simply switched between local and remote operation via a Modbus RTU RS485 network for control room or Cloud based monitoring applications.

When connected to a third-party Modbus enabled datalogger the UFM-300 is ideal for remote measurement in isolated areas. Its low power operating mode means it can be  powered from the datalogger for extended periods.

Sonic Driver UFM-300 Smart Phone Installation Manual 010724

Download the App from Play Store

Installation options include guide-rail, pipe, wall and cabinet brackets.

    

Sonic Driver UFM-300 Smart Phone Operating Instructions 010724

Configure the flowmeter from the App on your Smart phone or tablet. Simple and intuitive, a complete set of diagnostics and positioning screen are available to aid commissioning.

 

The meter totalizer can be started, stopped and reset from the App.

Sonic Driver UFM-300 Laptop Installation Manual 010724

Windows dashboard on a laptop allows configuring the flowmeter from a PC. Simple and intuitive, a complete set of diagnostics and positioning screen are available to aid commissioning.

   

   

The meter totalizer can be started, stopped and reset from the dashboard.

Sonic Driver UFM-300 Laptop Operating Instructions 010724

Sonic Driver UFM-300 Cable Wiring Connections 010724

A complete Modbus register map is available and allows the user to locally or remotely program, interrogate and take measurements from the UFM-300.

Sonic Driver UFM-300 Modbus RTU Protocol 010724

MODBUS WALL-UFM

A fixed installation, wall or panel mounted clamp-on ultrasonic flowmeter. Its intuitive configuration program, running on a PC (Windows) makes it incredibly easy to use. It incorporates heat quantity measurement functionality. It can accept up to 4 optional plug-in IO modules.

Sonic Driver MODBUS WALL-UFM datasheet 010724

Sonic Driver MODBUS WALL-UFM Installation Manual 010724

Sonic Driver MODBUS WALL-UFM Operating Instructions 010724

Specification

  • Pipe outer diameters from 10 to 6500 mm.
  • 3 competitively priced ranges to suite common application areas;
    • Small 10 to 115 mm, domestic.
    • Medium 115 to 225 mm, commercial.
    • Large 225 to 6500 mm, process industries.
  • Weight 700 g.
  • Dimensions 270 x 150 x 80 mm.
  • IP65 enclosure
  • Control unit operational temperature from -10 to +65 degC.
  • 12 to 24 Vdc PSU at 10 W.
  • Modbus RTU over RS485 serial communications.
  • Up to 4 optional plug-in IO modules including:
    • Active/Passive current Output 0/4 to 20 mA.
    • Alarm Relay (NO and NC) output.
    • PT100 input (4 wire).

Features

  • Intuitive installation using configuration program running on a PC.
  • Full set of measured values and instrument and measurement diagnostics available over Modbus RTU RS485.
  • Signal oscilloscope for sensor positioning and diagnostics.
  • Internal database of pipe and fluid materials.
  • Fluid database of sound speed, density and viscosity compensated for fluid temperature (if temperature is known from optional PT100 input).
  • Heat quantity measurement (if inlet and outlet temperatures are known from optional PT100 inputs).
  • Heat measurement is made using calculations as specified in EN1434-1, section 8 and its Appendix A.

Performance

  • Flow velocity range 0.01 to 25 m/s.
  • Resolution 0.25 mm/s.
  • Repeatability 0.15 % of measured value.
  • Accuracy +/- 0.5 to +/- 3.0 % of measured value  for velocity greater than 0.2 m/s, depending on application.
  • Turn down ratio 1/100.
  • Measurement rate 1 Hz as standard.
  • Gas/solids < 10 % of volume.
  • Measurement: Flow velocity (m/s), Volumetric flow (l/min), Mass Flow (kg/min), Energy flow (KJ/s).